Battery to usb

Hi,

I'm looking for some advise on how to start a project.

I have a battery pack, it's an Anton Bauer HyTRON 100, outputting 14.4 volts, 100 WH. My overall goal it to power 6 gopros via this battery.

Besides the problem of converting its D-tap plug to usb I can't find any USB hub on the market that will take the power and distribute a constant 5v 1amp to each 6 gopro. I'm guessing the output from the hub via usb to each gopro is being throttled to try and save power/be energy efficient, this causes the gopros to be under powered and freeze.

My question is what is the most effective way to deliver 6 usb outputs at a constant 5v 1amp from the battery?
- is their a usb hub that is reliable?
- will I need to build a custom solution, if so could i get a simple overview of the components needed.

Any advise would be appreciated!

Thanks,
Michael

now days a hub is available in the market, that you can easily connect will USB.

Hi - Michael Steele,
Hope this will help you ,it will give you 5v op for each channel.
ref the diagram attached.pl review my rating.




Good Luck V.Sambath kumar.

Hi, Michael Steele

I am waiting for the feed back of my circuit have you tried it out.
pl reply thank you.

Regards, V.S ambath kumar.