How to Combine SC6122-001 and SC73P2602N3 Remote Control Boards into One Unit

Hello there ,

I have 2 Remote Control board here , and I like to combine into 1 board ..

1 use SC6122-001 and 1 use SC73P2602N3

same voltage and same pinout for the matrix ..

anyone can help me ?



Is there any way to combine these 2 board into 1 ...

This is not a homework .. this is my hobby . and I like to know if theres way to do this ..

anyway ... the Board with SC6122 is use for old units.. and the SC73P2602 is for new one ..

I need to combine cause sometimes I change unit on my multimedia ..

- I need that 1 button press but 2 remotes work ...


Hope anyone can help me about this ..

thanks

Admin and Moderators, Apology
" Please move my thread if ever wrong section, - tnx "

Hi,

Well to be honest that is quite troublesome to think. But there are universal remote controls that you can just program to function for both devices. May I ask what are these devices you will be using the remote for? The thing with this universal remote control is that you can control devices with just knowing the frequency at the receiver. You can determine this by using a oscilloscope if you have one.

Just for fun, you might try just supplying both with power and see if they work. But the easiest would be the universal remote.