I am planning to build the SC200 amplifier described in EPE magazine. Although the article says components are all readily available I'm having some problems getting the 6.8ohm and 0.1ohm 3W 1% SMD 6332/2512 resistors - anyone know of a supplier please?
Part no. 1435952 – a current-sensing 0R1 1%, 3W 2512 resistor
Part no. 2476365 – 6R8 5%, 3W 2512 resistor
My guess is that it shouldn’t matter too much if the 6.8 ohm resistor is 5% not
1% since it works with inductor L2, which will be poorly defined. We will check whether this matters.
Mouser
www.mouser.co.uk
Part no. 71-CRCW25126R81FP – a 1% 6.8 ohm resistor, but it’s only 1W. Again, we
will check to see if the power rating is important.
Electrical power and systems are at the heart of modern society – and so too are electrical and electronics engineers. Engineers specializing in these fields have transformed the 21st century with technologies such as universal electric power systems, television
Electrical engineering is a highly technical pursuit that sits at the nexus of software and hardware development. Electrical engineers can design components and electronic systems for industrial machinery and consumer gadgets.
