Interfacing CPS120 Barometer Altimeter and GPS for Latitude, Longitude, Altitude on Pi

Hello after very long time I have been started with new barometric Altimeter sensorhttps://store.ncd.io/product/cps120-digital-barometer-altimeter-i2c-mini-module/ but with the help of code i was able to check the pressure system easily but how can I use these kind sensor with GPS system and share the latitude and longitude easily while interface with Raspberry pi,

Any useful elaboration to make it work to extract the latitude longitude and pressure system as well height will be much useful

Hello Robson,
I'm not exactly sure what help you are asking for. You said that you've gotten the altimeter sensor to work with some code. Was this sample code or did you write it yourself?
You should be able to get a GPS module with similar interface and likely will have sample code so you should be able to get it working.
Now to combine the two is only a bit trickier. You need to take the functions that read each sensor and put them one after the other in your code. Then you should have data from both.