Extech 48VFL PID Controller Wiring for Thermocouple, Heat Cartridge, Power Connection

183 1

Report a violation of the law

Reply | New topic

#1 21680345 26 Jul 2018 03:42

Kevin Zheng Kevin Zheng

Anonymous

Post #1
21680345 26 Jul 2018 03:42

I have an Extech 48VFL PID controller and I was having trouble properly wiring it. I'm connecting it to a thermocouple, heat cartridge, and giving it power with a striped extension cord.
Here is the wiring diagram: http://www.extech.com/resources/48VFL_96VFL_UM.pdf
ADVERTISEMENT
#2 21680346 26 Jul 2018 03:59

Rick Curl Rick Curl

Anonymous

Post #2
21680346 26 Jul 2018 03:59

Hi Kevin-Assuming you're in the United states- The white (neutral) wire from the power source goes to pin 1, along with one side of the heating element. The black (hot) wire from the power input goes to pin 2, along with a jumper to pin 11. the other wire from the heating element goes to pin 12.Make sure the heating element does not draw more than 5 amps.-Rick
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Extech 48VFL PID Controller Wiring for Thermocouple, Heat Cartridge, Power Connection

Didn't find an answer? Ask Artificial Intelligence