Until I get a yes I will not post the machine design. I have no interest in trying to patent it. If it has some useful purpose then it is your to use as you see fit. If it is a worthless design then the only time lost is mine.
I suggest you to speak with the "CHAMBER OF COMMERCE" of your country.Your idea could be be very useful. There the office can give you very good suggestions.RegardsGiovanni Di Maria
here is a link to the machines design. The mechanics is based on the following-Can this machine produce useful work?Principles to run the machine
These are a few basic principles
[1] an enclosed container (X) of air submerged
in water has a lifting force (Y) equal to the volume of the water displaced
minus the weight of the container;
[2] connecting multiple containers one on top
of the other creates a combined lifting force of (Y)+ (Y)+ (Y)+ (Y)+ (Y)+ (Y)+
(Y)+ (Y)+ (Y)+ (Y)
Which is a greater lifting force than (Y);[3] the energy needed to fill one container is equal to the
energy needed to sustain the combined lifting force of the 10 (ten) containers
referenced above;
Below is a diagram of this machine for your review and
comments
https://www.usmessageboard.com/threads/ultimate-energy-source.770363/post-24589228 comments pro and con welcome
Like Giovanni Di Maria rightly commented, contact the chamber of commerce of your country. They should put you through the steps involved. Make sure the machine is easy to use and should have an LED display to make it more user friendly.I do wish you success in your endeavours.
I feel pleased to have this information,firstly congratulations at your work,i always suggest one to get into a company so that you could get economic support,thanks from https://hyfytvapk.com/
