Hi,
My project diagram is similar to attached figure.
Lets say input is 3p 380VAC, 60Hz, Main Transformer MTR runs at 20kHz, DC output should be 50-147 v, charging current 100A. Should have CC and CV mode of operation.
I need to implement FW with following facilities,
1. Shunt/ Temperature sensing
2. 3v AC to 16 bit ADC having channel current and voltage
3. CAN/SPI/SCI protocol
4. PF correction, PI or PID control
5. PWM for high frequency switching.
Kindly suggest any simulation model/ EVM board/tools to understand the system.
My project diagram is similar to attached figure.
Lets say input is 3p 380VAC, 60Hz, Main Transformer MTR runs at 20kHz, DC output should be 50-147 v, charging current 100A. Should have CC and CV mode of operation.
I need to implement FW with following facilities,
1. Shunt/ Temperature sensing
2. 3v AC to 16 bit ADC having channel current and voltage
3. CAN/SPI/SCI protocol
4. PF correction, PI or PID control
5. PWM for high frequency switching.
Kindly suggest any simulation model/ EVM board/tools to understand the system.
Attachments:
-
BAT_CHR.jpg
(51.38 KB)
You must be logged in to download this attachment.
