Reducing the output power of an ultrasonic Piezo Ceramic disc from 35 watts to 10 watts by adjusting the control board is possible but entails several considerations:
Effectiveness and Performance
Lowering power may compromise the effectiveness of the ultrasonic device, potentially reducing its ability to achieve desired results like cleaning or atomization.
Reduced power might lead to weaker vibrations, impacting performance, especially if the device operates away from its optimal resonance frequency.
Durability and Lifespan
Lowering power could potentially increase the device's lifespan by reducing stress on the piezo ceramic disc.
However, extreme power reductions may lead to inadequate vibrations, causing premature failure or erratic behavior.
Control Board Compatibility
Ensure the control board allows precise adjustment without compromising stability or reliability.
It should deliver a consistent and accurate power level to the piezo ceramic disc for reliable operation.
Testing and Calibration
Thorough testing and calibration are necessary post-adjustment to ensure proper functionality at the reduced power level.
Verify output amplitude, frequency, and overall performance under various operating conditions.
