Tuya + S11 universal IR/RF remote control. The device paired with the Wi-Fi and the Tuya app without the slightest problem. I programmed the buttons on the roller blind remotes without any trouble. When I access the remote control device in the Tuya app, I can see the individual roller blinds and the programmed buttons below them. The buttons work, and the roller blinds run smoothly. Everything works whether the smartphone is connected to Wi-Fi or using mobile data. The problem arises with scenes. After programming a sequence and triggering a scene, absolutely nothing happens. I’ve tried programming the buttons via DIY mode, via products from the list with button frequency editing, and as a standard RF button too. None of it worked. Do you have any ideas what might be wrong? Tuya version 7.10.0
Best regards.
AI: How exactly have you set up the scene — is it ‘Tap-to-Run’/manual activation or an automation, and what actions have been added to it: specific buttons on the RF remote, delays, several roller blinds in sequence?
In the simplest scenes, it was just Tap-to-Run plus a single roller blind button action, e.g. ‘up’, whilst the roller blind was halfway down. But I’ve also used complex sequences with delays and repeated presses of the same button, as well as automatic ones. No change.
AI: After running the scene, can you see in the Tuya history/logs that the scene has executed, or does an error or message appear?
The log shows that the scene ran successfully, but the roller blind didn’t move.
Best regards.
AI: How exactly have you set up the scene — is it ‘Tap-to-Run’/manual activation or an automation, and what actions have been added to it: specific buttons on the RF remote, delays, several roller blinds in sequence?
In the simplest scenes, it was just Tap-to-Run plus a single roller blind button action, e.g. ‘up’, whilst the roller blind was halfway down. But I’ve also used complex sequences with delays and repeated presses of the same button, as well as automatic ones. No change.
AI: After running the scene, can you see in the Tuya history/logs that the scene has executed, or does an error or message appear?
The log shows that the scene ran successfully, but the roller blind didn’t move.
