Creative A200 (Model MF0355) 9-Pin Mini DIN Plug Wiring: Gray, Black, Blue, Brown, White, Red

I have searched the forum for these speakers but still cannot find a suitable schematic. The point is that the 9PIN mini DIN (round) plug has broken off and I have no idea how to connect it. There are many pictures on the forum showing the correct connection, but the colors of the wires do not match. in my Creative A200 speaker there are colors like:
-Gray
-Black
-Blue
-Brown / orange (hard to say)
-White from which comes the second white and copper.
- red from which comes the second red and copper

probably both of these outgoing copper wires were connected but I'm not quite sure about that. I hope that some of you have already dealt with it and somehow will solve my problem, because the price of such a "simple" repair in the repair shop will probably cost more than the new speakers.


photo of wires:

http://www.tinypic.pl/1o0q1hjsfnis

and a pictorial drawing of what it looks like:

http://www.tinypic.pl/aq6s7rea79ua

at the top there is 230 only it looks like 240 but I did not want to improve.

plug diagram:

http://www.justwebspace.com/G2/albums/userpics/10001/ifi9pin.gif

the colors do not match (I don't have green)


I found:

https://obrazki.elektroda.pl/4763578900_1383349886.jpg

Thanks a lot, it helped a lot, I found an old plug with broken pins 5 and 2 but as you can see in the picture 5-empty, and instead of 2 maybe 4 so it's ok. The speakers are fluttering as they should