Hello,
I have a problem finding the coil for the card in Renault Megane II 2005.
After the card fell (I only have one), the element marked on the screen has broken off. I found out from a search on the forum that it's a hands free coil. I had a general problem with this card, the car did not respond to buttons. I decided to disassemble the card and in the middle saw: broken 1nf smd capacitor, also solder from this large round coil, in the middle a hands free coil flew (cracked core and winding - I tried to solder under a microscope, but I failed, the pins from the mounting were on disc - damaged element). After soldering the capacitor that flew out and soldering the coil from the immobilizer, the car began to respond to the buttons, a bath in the washer and after inserting the card into the meganka reader fires; the problem is now just how the card is kept in your pocket - no response to start and some strange central opening and closing. If you put it in the reader, it's ok. I called the service, if they would undertake repairs, there is no such option. They can program a new card - PLN 1000 (700 card + coding). A bit expensive. I also found a magician in Warsaw who was to cover the topic (I did not want to rummage because my knowledge is focused on placing BGA
but he made me a horse. First of all, no permanent address, secondly, he wanted to take the card, and what finally turned out he didn't have a hands free coil and offered me a card without hand free for PLN 300. Do the two coils on the board have identical parameters (the one on the right)? Do you know any store or parameters of this element where you can buy it? Gentlemen, a warm request for help. In practice, a similar industry, laptop service for 10 years, I asked colleagues but they do not associate the topic. At a friendly auction there are cards used to buy, but it is not known whether it is with hands free or without? One more question: what to glue? Some kind of blob or something else? Regards Paweł, and thank you in advance for your answer. I was looking for some schemes in Russian forums, but it's hard.
I have a problem finding the coil for the card in Renault Megane II 2005.
After the card fell (I only have one), the element marked on the screen has broken off. I found out from a search on the forum that it's a hands free coil. I had a general problem with this card, the car did not respond to buttons. I decided to disassemble the card and in the middle saw: broken 1nf smd capacitor, also solder from this large round coil, in the middle a hands free coil flew (cracked core and winding - I tried to solder under a microscope, but I failed, the pins from the mounting were on disc - damaged element). After soldering the capacitor that flew out and soldering the coil from the immobilizer, the car began to respond to the buttons, a bath in the washer and after inserting the card into the meganka reader fires; the problem is now just how the card is kept in your pocket - no response to start and some strange central opening and closing. If you put it in the reader, it's ok. I called the service, if they would undertake repairs, there is no such option. They can program a new card - PLN 1000 (700 card + coding). A bit expensive. I also found a magician in Warsaw who was to cover the topic (I did not want to rummage because my knowledge is focused on placing BGA
