logo elektroda
logo elektroda
X
logo elektroda
Advanced Search
logo elektroda

Addressing Error 2 on Saeco Incanto Deluxe HD8922 Espresso Machine: User Experiences

sp3qfo 44706 9
Best answers LABEL_AI_GENERATED

Why does a Saeco Incanto Deluxe HD8922 show error 2, and what component should be checked or replaced?

Error 2 on this Saeco usually points to a problem in the coffee grinder, most often a jammed or faulty grinder motor [#18390536] One user reported that the error was caused by a burnt coffee grinder motor, and replacing the motor restored grinder operation [#18393182] Another case showed that a worn gear/mode in the grinder was locking the motor up; the machine would only run after manually starting the motor until the next jam [#19726712] Replacing the engine/motor was also reported to work as a fix [#19730725]
AI summary based on the discussion. May contain errors.
ADVERTISEMENT
Treść została przetłumaczona polish » english Zobacz oryginalną wersję tematu
Report a violation of the law
Reply | New topic
  • #1 18389082
    sp3qfo
    Level 12  
    Posts: 25
    Rate: 25
    A warm welcome to everyone.
    I have a Saeco Incanto Deluxe HD8922 coffee machine, which is displaying error code 2. I would be grateful if anyone could advise whether they have encountered this error before. The manual I found online does not mention an error with this code. Thank you in advance for your replies.
    Piotr

    Addressing Error 2 on Saeco Incanto Deluxe HD8922 Espresso Machine: User Experiences Addressing Error 2 on Saeco Incanto Deluxe HD8922 Espresso Machine: User Experiences
  • ADVERTISEMENT
  • #2 18390536
    sorier
    Level 30  
    Posts: 1099
    Help: 166
    Rate: 635
    Check the coffee grinder.
  • ADVERTISEMENT
  • #3 18393182
    sp3qfo
    Level 12  
    Posts: 25
    Rate: 25
    The fault was caused by a burnt-out motor in the coffee grinder. Thanks for the tip!
    After replacing it, the grinder is working, but there’s a problem with the quality of the coffee. The coffee is very weak.
    How do I adjust the burr settings correctly, and what else could be causing the coffee to be so watery?

  • Brewing unit cleaning and grind adjustment advice

    #4 18393395
    sorier
    Level 30  
    Posts: 1099
    Help: 166
    Rate: 635
    Clean and lubricate the brewing unit. After a dozen or so coffees, the machine will adjust the amount of coffee according to the strength setting.

    Set the grinding coarseness so that the coffee flows as slowly but steadily as possible from both sides. If you get to the minimum on the knob, you have to turn the knob. There is a way to calibrate the burrs, but it is a waste of time, it is good at the factory when everything is new.

    And the most important. Do not overdo it with water, one coffee is about 100 ml of water, epresso max 50.
  • ADVERTISEMENT
  • #5 18397909
    vascat73
    Level 1  
    Posts: 1
    Rate: 32
    Hello;
    You can write where you bought and for how much such an engine? I have the same error, but in my case it helps to "start" the engine and the grinder is already working. Of course, until the next jam - error number 2.
  • ADVERTISEMENT
  • #6 19435476
    RalphOcean
    Level 11  
    Posts: 85
    Rate: 47
    vascat73: What do you mean by "starting" the engine?
    sp3qfo: How much does it cost to replace an engine with a new one?
    I don't even know how to check this engine.
  • #7 19726712
    gur
    Level 14  
    Posts: 148
    Help: 3
    Rate: 4
    Hello

    I also have error 2 but after disassembling the grinder it looks to blame for a worn skew mode which is causing the motor to lock up.
    Until yesterday, turning the grinder pliers helped me as well. Now I don't want to twist so it gets stuck.

    For now, I'm ordering the mode itself.
    Addressing Error 2 on Saeco Incanto Deluxe HD8922 Espresso Machine: User Experiences
  • #8 19730725
    RalphOcean
    Level 11  
    Posts: 85
    Rate: 47
    I had to replace the engine and so far it has been effective. I did not disassemble the engine into its first parts.
  • #9 20222653
    szy18
    Level 14  
    Posts: 152
    Help: 8
    Rate: 127
    hello, colleagues, I have a saeco incanto HD8917 express and error number 23 on the display? what's the problem ?
  • #10 20444857
    radeks1968
    Level 13  
    Posts: 735
    Rate: 420
    What does j6:j20 mean
Reply | New topic
Report a violation of the law

Topic summary

LABEL_AI_GENERATED
The Saeco Incanto Deluxe HD8922 espresso machine displays error 2, which is not documented in the manual. Users suggest checking the coffee grinder, as a burnt motor may cause this error. After replacing the grinder, some users report issues with coffee quality, indicating a need for proper burr settings and brewing unit maintenance. Recommendations include cleaning and lubricating the brewing unit, adjusting the grind coarseness, and ensuring the correct water amount for brewing. Some users have experienced motor lock-ups due to worn components and have successfully replaced the motor to resolve the issue.
AI summary based on the discussion. May contain errors.
ADVERTISEMENT