Good morning, on the laptop board: Dell Inspiron 5570, board model: CAL50 / DAL10 LA-F115P one resistor is missing which is connected in series with the second resistor. Both resistors are connected to the NCP81218 pin 6 and 7. The missing resistor is connected on one side to the pin No. 7. I am...

See appendix Pin description. ps The circuit was in Compal LA-E892P, SM in annex.

Hello, thank you for the information, the resistor is 75 kOhm. The controller moved. Regards.

NCP81218 controller, no resistor connected to pin No. 7 of the system.

Reply | New topic

#1 18904358 03 Sep 2020 12:39

Bodzio2 Bodzio2

Level 11

» |

Post #1
18904358 03 Sep 2020 12:39

Good morning,
on the laptop board: Dell Inspiron 5570, board model: CAL50 / DAL10 LA-F115P one resistor is missing which is connected in series with the second resistor.
Both resistors are connected to the NCP81218 pin 6 and 7.
The missing resistor is connected on one side to the pin No. 7.
I am looking for information about this resistor.
ADVERTISEMENT
Helpful post

#2 18904397 03 Sep 2020 13:00

lisek lisek

Service technician RTV
» | Helpful post? (+2)

Helpful post
Post #2
18904397 03 Sep 2020 13:00

See appendix
Pin description.

ps
The circuit was in Compal LA-E892P, SM in annex.

Attachments:

Acer Aspire A515-51G C5V01 LA-E892P R1A Schematic.rar Download (1.77 MB)

NCP81218.pdf Download (379.28 KB)
#3 18904757 03 Sep 2020 17:34

Bodzio2 Bodzio2

Level 11

» | Topic author Helpful post? (0)

Post #3
18904757 03 Sep 2020 17:34

Hello,
thank you for the information, the resistor is 75 kOhm.
The controller moved.
Regards.
Create an account, log in and become active in a forum and ads will not appear. You will receive points by participating in discussions.
Join this discussion.

Install the application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

NCP81218 controller, no resistor connected to pin No. 7 of the system.

Didn't find an answer? Ask Artificial Intelligence