Hello everyone,
I have been working as a mechanic for 34 years. I am retiring sooner or later and I find repairing car computers would be a
good way to keep busy and make a little coin to supplement income.
I am trying to read a 95080 eeprom soic8 that I am trying to clone. Any suggestions for a programmer.
I am also trying to read an ST L9613 data eeprom, also soic8.
The L9316 is in a 2005 Mini R50 with manual trans. It is a Siemens made DME.
Just cannot find a programmer.
Thanks for reading, RevBernie [url=https://obrazki.elektroda.pl/5758813000_1616949529.
I have been working as a mechanic for 34 years. I am retiring sooner or later and I find repairing car computers would be a
good way to keep busy and make a little coin to supplement income.
I am trying to read a 95080 eeprom soic8 that I am trying to clone. Any suggestions for a programmer.
I am also trying to read an ST L9613 data eeprom, also soic8.
The 95080 chip is in a 2006 Dodge Caravan 3.3 liter.
The PCM (powertrain control module) needs to be read to extract the hex file from the chip. This will allow to transfer all of
the vehicles info to a new eeprom or use the original. This will work for both vehicles. Both vehicles are no start/no crank.
The PCM (powertrain control module) needs to be read to extract the hex file from the chip. This will allow to transfer all of
the vehicles info to a new eeprom or use the original. This will work for both vehicles. Both vehicles are no start/no crank.
The L9316 is in a 2005 Mini R50 with manual trans. It is a Siemens made DME.
Just cannot find a programmer.
Thanks for reading, RevBernie [url=https://obrazki.elektroda.pl/5758813000_1616949529.
