![[ZIGBEE] 20A Zigbee socket with energy metering (Tuya TS011F_plug_3)](https://obrazki.elektroda.pl/1000454900_1749493372_thumb.jpg)
![[W600 / TW-03] Door Sensor - Bootloop on 1.18.110/109 Firmware](https://obrazki.elektroda.pl/5552096400_1749191730_thumb.jpg)
Hello
I'm totally unfamiliar, so I'd like to ask people smarter than myself.
From what I have already managed to read, the Nest Thermostat is suitable for floor control. One thermostat for 1 circuit.
I have 8 circuits in my house and a wire in each room leading to a temperature controller. I don't yet have a floor control unit (opening and closing solenoid valves) as I don't know which one can work with this thermostat.
All I care about is that the thermostat opens the solenoid valve or closes it depending on the required room temperature.
Perhaps someone here already has this thermostat at their place and could share information on how to connect this and to which floor controller.
I would be very, very grateful for your help.
Best regards
I'm totally unfamiliar, so I'd like to ask people smarter than myself.
From what I have already managed to read, the Nest Thermostat is suitable for floor control. One thermostat for 1 circuit.
I have 8 circuits in my house and a wire in each room leading to a temperature controller. I don't yet have a floor control unit (opening and closing solenoid valves) as I don't know which one can work with this thermostat.
All I care about is that the thermostat opens the solenoid valve or closes it depending on the required room temperature.
Perhaps someone here already has this thermostat at their place and could share information on how to connect this and to which floor controller.
I would be very, very grateful for your help.
Best regards
