ASK 433MHz Module Not Communicating with 8051 via MAX232, Works with Wired UART

42 1

Report a violation of the law

Reply | New topic

#1 21671107 26 Feb 2014 02:23

Darpan Damani Darpan Damani

Anonymous

Post #1
21671107 26 Feb 2014 02:23

Hello,

I am using ask module of 433 Mhz.

I Have connected my ask transmitter data pin to max232.

and receiver data pin to my P3.0(RXD) pin.

But it is not working fine.

The code is correct because i checked it using wired connection that means directly connecting max232 pin no.12 to P3.0, which is working correct.

I have used lcd to display the character sent by uart

Thanks
ADVERTISEMENT
#2 21671108 26 Feb 2014 02:36

Darpan Damani Darpan Damani

Anonymous

Post #2
21671108 26 Feb 2014 02:36

I am designing pc controlled that means through UART.
Max232 is being used and ask transmitter is connected to it,which is used to send character using uart.
and ask receiver is used on the microcontroller side, it is connected to RX terminal of my controller..
still it is not working
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

ASK 433MHz Module Not Communicating with 8051 via MAX232, Works with Wired UART

Didn't find an answer? Ask Artificial Intelligence