Hi
So in my design I am going to sense two PV panels in series ( Both voltage and current) to extract the Maximum power point (MPPT by arduino)
so the input of both sensors will be the PV output
and the output of the sensors will be input to arduino uno
My question is how should I connect these sensors
LTS25NP ,
http://i01.i.aliimg.com/wsphoto/v0/729438619_2/LEM-LTS25-NP-Hall-Current-Sensor.jpg
LV 25-P
http://www.dacpol.eu/files/en/katalog/ed15/2/226_228/7-8.jpg
thank you so much and best regards
So in my design I am going to sense two PV panels in series ( Both voltage and current) to extract the Maximum power point (MPPT by arduino)
so the input of both sensors will be the PV output
and the output of the sensors will be input to arduino uno
My question is how should I connect these sensors
LTS25NP ,
http://i01.i.aliimg.com/wsphoto/v0/729438619_2/LEM-LTS25-NP-Hall-Current-Sensor.jpg
LV 25-P
http://www.dacpol.eu/files/en/katalog/ed15/2/226_228/7-8.jpg
thank you so much and best regards
