Good evening,
I'm wanting to build an electric oven for my shop to cure paint parts at a low temp. (165 deg. F)
However, I've never done this before and was curious what kind of power, parts/wires I would need.
Constraints:
-I believe I need about 2500-3000 Watts to warm up my painted parts inside 80 cubic ft.
-Need a fan inside to circulate the heated air inside.
-Must be able to control/regulate temperature consistently (within 10 degrees would be good).
Questions:
Could you tell me what kind of power I should use? 3 phase power? 480 V or 208V?
Can you list out all the parts and wires I would need?
Do I put fuses before and after of each component? i.e. before the SSR and after
Any help would be appreciated.
I'm wanting to build an electric oven for my shop to cure paint parts at a low temp. (165 deg. F)
However, I've never done this before and was curious what kind of power, parts/wires I would need.
Constraints:
-I believe I need about 2500-3000 Watts to warm up my painted parts inside 80 cubic ft.
-Need a fan inside to circulate the heated air inside.
-Must be able to control/regulate temperature consistently (within 10 degrees would be good).
Questions:
Could you tell me what kind of power I should use? 3 phase power? 480 V or 208V?
Can you list out all the parts and wires I would need?
Do I put fuses before and after of each component? i.e. before the SSR and after
Any help would be appreciated.
