Nivona 691: Step-by-Step Guide to Remove, Clean Coffee Dispenser Panel and Spouts

I want to clean the nozzles through which the coffee flows.
It’s easy on other coffee machines, but I’ve no idea how to do it on this Nivona.
How do I remove the panel to get to the nozzles?
I’ve attached some photos.

The black panel covering the display stays on the latches. Silver border also.
I don't remember if you will gain access to the spout. But I think so.
To disassemble the entire head you have to unscrew it from the inside.

I found the instructions (attached). Unfortunately, you have to spin up the machine.

Hello!
Old topic, but I'll connect. I have Nivona 830. I noticed that my coffee flows out of these short nozzles, not large ones. This should be the effect of clogging the spout and for replacement? What are these smaller nozzles for?
Best regards!

PS.
Ok. The jets are stuffed and it's okay.

Buy a large syringe, Reiniger cleaning powder for coffee machines, tubing. Prepare a warm solution and inject one spout / other alternately. Taking breaks, the solution worked. It may take up to several hours but it will finally help, dissolve. Mechanical weaving will help for a moment. And the reason is the lack of cleaning of the coffee brewing system with a tablet which, starting from the sieves in the brewing block, also cleans the coffee spout and spout.

1dino wrote:

I found the instructions (attached). Unfortunately, you have to unscrew the espresso machine.

I can't download the manual, you can ask @
rafal1.moczulski(_at_)gmail.com