The engine is after replacing the timing. While driving, the setting of the distance of the intake valves is suspended, in normal driving it is from 1.6 mm to 9.45 mm. At a standstill 0.45 mm. As the error crashes then it hangs at 9.45 and the end. The engine runs erratically and lacks power. The question is: what to check, setting the variators or the mechanism of lifting the intake valves. Sensors replaced for good.
Added after 15 [hours] 11 [minutes]:
Do you have any ideas?
Added after 8 [hours] 44 [minutes]:
Shame and I have to go to the Russian speaking pages again
Added after 15 [hours] 11 [minutes]:
Do you have any ideas?
Added after 8 [hours] 44 [minutes]:
Shame and I have to go to the Russian speaking pages again
