logo elektroda
logo elektroda
X
logo elektroda

PS4 & AUX Port: Alternative Camera Connection, Bent Contacts, Adapters, & VR Configuration

kaskawil 14418 1
ADVERTISEMENT
Treść została przetłumaczona polish » english Zobacz oryginalną wersję tematu
  • #1 16905090
    kaskawil
    Level 8  
    Hi everyone, I wanted to ask you for help / advice.

    I bought a VR on PS4, connected it and wanted to configure it. However, the system cannot see the CAMERA.
    The camera enters the PS4 aux socket, which looks like this:
    PS4 & AUX Port: Alternative Camera Connection, Bent Contacts, Adapters, & VR Configuration
    After thinking about what is wrong, I started to look at the aux socket (new webcam, rather not clef). It turned out that the middle contacts were bent maximum and down. I tried them straightforward. It looks like this:
    PS4 & AUX Port: Alternative Camera Connection, Bent Contacts, Adapters, & VR Configuration
    I lost hope that this method would succeed.
    The question is, is there an alternative to connecting this camera? Maybe some adapters? But I did not find on the net. Maybe you know something to advise?
    Repair comes into play after the new year, I was told, but I have to settle the topic for Christmas because it's a gift from parents and grandparents for a child.
    The ultimate last resort is to buy a new console and repair and sell the old one, but I would love to avoid it.
    I am asking for advice.

    I will answer myself because I solved the problem.
    1. There are no adapters. Webcam only in the AUX port.
    2. I straightened the contacts with great care with a needle, it took a bit and I had a bad feeling but it WORKS strangely.

    It was worth a try.
    Regards and Merry Christmas
  • ADVERTISEMENT
  • #2 16939097
    tomplichta
    Level 12  
    I would advise you to desolder this port and insert a new one. Because the contacts are made so that they spring. A friend of Spox_2 from Virtual Future will exchange it for you
ADVERTISEMENT