Hello, I have an esp-07 with ESPEasy_R120_1024.bin uploaded, everything works ok. But when I want to upload ESP_Easy_v2.0.0-dev13_normal_ESP8266_1024.bin I get the response in the console . and the module crashes. What could be the cause ?

And when uploading the new software, do you connect GPIO No. 0 and 15 to GND to enter programming mode ?

Programming went ok, the problem was not enough flash. The solution turned out to be to upload v2.0.0-dev8.

ESP-07 with ESPEasy V2.0.0-dev13 - wdt reset and module hangs up

| New topic

#1 16931450 02 Jan 2018 20:47

Arek1984 Arek1984

Level 16

» |

Post #1
16931450 02 Jan 2018 20:47

Hello,
I have an esp-07 with ESPEasy_R120_1024.bin uploaded, everything works ok.
But when I want to upload ESP_Easy_v2.0.0-dev13_normal_ESP8266_1024.bin I get the response in the console
Quote:
ets Jan 8 2013,rst cause:4, boot mode:( 1,4)

wdt reset
.
and the module crashes.
What could be the cause ?
ADVERTISEMENT
#2 16931727 02 Jan 2018 22:17

chemik22 chemik22

Level 14

» | Helpful post? (0)

Post #2
16931727 02 Jan 2018 22:17

And when uploading the new software, do you connect GPIO No. 0 and 15 to GND to enter programming mode ?
#3 16931931 02 Jan 2018 23:31

Arek1984 Arek1984

Level 16

» | Topic author Helpful post? (0)

Post #3
16931931 02 Jan 2018 23:31

Programming went ok, the problem was not enough flash.
https://www.letscontrolit.com/wiki/index.php/ESPEasy#2.0.2B_firmware_on_1MB_modules
The solution turned out to be to upload v2.0.0-dev8.
Create an account, log in and become active in a forum and ads will not appear. You will receive points by participating in discussions.
Join this discussion.

Install the application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

| New topic

Report a violation of the law

ESP-07 with ESPEasy V2.0.0-dev13 - wdt reset and module hangs up

Didn't find an answer? Ask Artificial Intelligence