COM UART tunnel over Wi-FI on ESP-01 (ESP8266) for Windows and Linux

942 4

Treść została przetłumaczona

Zobacz oryginalną wersję tematu

Report a violation of the law

Reply | New topic

#1 18092149 01 Aug 2019 19:24

Anonymous Anonymous

Level 1

» |

Post #1
18092149 01 Aug 2019 19:24

I am looking for some kind of ready-made (almost ready-made) for the ESP8266 so that using a VCOM or similar program I can see the UART of the ESP8266. One use will be to be able to upload a new program to an ArduinoMega that is far from the computer (different room). It also needs a similar solution for Linux (RPi 3B+).
Can you recommend any proven solution?
ADVERTISEMENT
Helpful post

#2 18092226 01 Aug 2019 20:13

Anonymous Anonymous

Level 1

» |

Helpful post
Post #2
18092226 01 Aug 2019 20:13

o_Tadeusz wrote:
I am looking for some kind of ready-made (almost ready-made) software for the ESP8266 so that when using a VCOM or similar program, I can see the ESP8266 UART.

https://github.com/jeelabs/esp-link
ADVERTISEMENT
#3 18092241 01 Aug 2019 20:27

Anonymous Anonymous

Level 1

» |

Post #3
18092241 01 Aug 2019 20:27

Many thanks.

Added after 5 [minutes]:

In what environment does the code compile?
ADVERTISEMENT
Helpful post

#4 18092341 01 Aug 2019 21:15

Anonymous Anonymous

Level 1

» |

Helpful post
Post #4
18092341 01 Aug 2019 21:15

o_Tadeusz wrote:
In what environment does the code compile?
.

https://github.com/jeelabs/esp-link/blob/master/BUILDING.md

But you can also use ready-made firmware: https://github.com/jeelabs/esp-link/releases
Helpful post

#5 18092342 01 Aug 2019 21:15

kaczakat kaczakat

Level 34

» | Helpful post? (+1)

Helpful post
Post #5
18092342 01 Aug 2019 21:15

Mr @o_Tadeusz , you don't have to compile anything, download the binary from the link in the "Releases & Downloads" section, there is a manual about the tools, upload it to the ESP, connect to the phone, set the network parameters, possibly switch to station and use it. Configuration is via a web panel.

Helpful post? Buy me a coffee.
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Home page
/
Forum
/
Smart Home
/
Smart Home IoT
/
ESP8266 and ESP32
/
COM UART tunnel over Wi-FI on ESP-01 (ESP8266) for Windows and Linux

COM UART tunnel over Wi-FI on ESP-01 (ESP8266) for Windows and Linux

Didn't find an answer? Ask Artificial Intelligence