ESP 32 Wrover Kit, Jtag, Eclipse, openOCD - Flashing firmware, esptool or misuse of openOCD?

729 2

Treść została przetłumaczona

Zobacz oryginalną wersję tematu

Report a violation of the law

Reply | New topic

#1 19010875 31 Oct 2020 10:44

Anonymous Anonymous

Level 1

» |

Post #1
19010875 31 Oct 2020 10:44

I have a question for those who have used.

I have a problem with uploading firmware via JTAG. I understand that this version of openOCD (supplied with IFD) does not support flashing via JTAG.

The only solution is to flash via esptool and then start a debug session. This is not a particular problem - I have modified the cmake files, but is this the case or am I doing something wrong.

From Display to Complete System: How the Solution Team Creates Value at Unisystem [ad]
ADVERTISEMENT
Helpful post

#2 19011417 31 Oct 2020 15:45

Anonymous Anonymous

Level 1

» |

Helpful post
Post #2
19011417 31 Oct 2020 15:45

agent.007 wrote:
The only way out is to flash via esptool and then start a debug session. This is not a particular problem - I have modified the cmake files, but is it so
.
Yes it is, as you wrote.

Added after 10 [minutes]:

But optionally it is possible to flash via JTAG: Link .
I don't do it that way - I use ESP-PROG, so I connect the UART to the ESP32 for flashing and log monitoring anyway.
#3 19011437 31 Oct 2020 15:45

Anonymous Anonymous

Level 1

» |

Post #3
19011437 31 Oct 2020 15:45

Thanks. They could have written a chunk of code for FLASH programming. But I guess that's the affliction of all Far Eastern modifications of openOCD. Sony (Spresense) also broke their teeth on openOCD.
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

ESP 32 Wrover Kit, Jtag, Eclipse, openOCD - Flashing firmware, esptool or misuse of openOCD?

Didn't find an answer? Ask Artificial Intelligence