![[ZIGBEE] 20A Zigbee socket with energy metering (Tuya TS011F_plug_3)](https://obrazki.elektroda.pl/1000454900_1749493372_thumb.jpg)
Good afternoon,
I am trying to set up a seemingly simple scene on a Tuya Zigbee 3.0 control panel. The idea is to send an alarm/message when the gate/door is open for more than a certain time, e.g. 5 min. It is possible to create such a scene, but in practice it looks like if closing happens faster than 5 min after opening, the message/alarm is sent even though the gate has already been closed. I wrote to the official foreign service about this and in reply I got the information that not all sensors support such scenes. Maybe one of the forum members has an understanding of a similar topic and could help how to solve such a situation ?
I am trying to set up a seemingly simple scene on a Tuya Zigbee 3.0 control panel. The idea is to send an alarm/message when the gate/door is open for more than a certain time, e.g. 5 min. It is possible to create such a scene, but in practice it looks like if closing happens faster than 5 min after opening, the message/alarm is sent even though the gate has already been closed. I wrote to the official foreign service about this and in reply I got the information that not all sensors support such scenes. Maybe one of the forum members has an understanding of a similar topic and could help how to solve such a situation ?
