Hi there 🙂 I am looking for a solution to a specific driver dimmer for lighting: - when power is applied, it sets the 1W/12V COB to 10% and stays that way. Barely lights up - applying 12V to the input causes stepless brightening to 100% - no voltage on the input causes dimming to 10% Brightness...

Does this COB have a dimming option?

Hey. It doesn't. I just happen to have one, but it could be a regular 1W LED. I am indifferent. Added after 17 [minutes]: In addition to the topic: - I have 30 posts with lights. In the evening, the twilight switch feeds power to them. - they are illuminated at about 10% - after approaching any of them, this one starts illuminating at 100% - leaving the post causes a return to illumination at 10% after 30-40 seconds. Such a soft start but from the 10% level.

Wanted dimmer controller for COB 1W/12V with brightness control from 10% to 100%

Reply | New topic

#1 20735675 16 Sep 2023 17:36

arkadiuszczekay arkadiuszczekay

Level 2

» |

Post #1
20735675 16 Sep 2023 17:36

Hi there 🙂
I am looking for a solution to a specific driver dimmer for lighting:
- when power is applied, it sets the 1W/12V COB to 10% and stays that way. Barely lights up
- applying 12V to the input causes stepless brightening to 100%
- no voltage on the input causes dimming to 10%
Brightness change time 1 - 1.5 seconds
I have been searching for a week and have found nothing....
ADVERTISEMENT
#2 20736024 16 Sep 2023 22:38

sosarek sosarek

Company Account
Level 43

» | Helpful post? (0)

Post #2
20736024 16 Sep 2023 22:38

Does this COB have a dimming option?

Helpful post? Buy me a coffee.
#3 20736263 17 Sep 2023 10:00

arkadiuszczekay arkadiuszczekay

Level 2

» | Topic author Helpful post? (0)

Post #3
20736263 17 Sep 2023 10:00

Hey. It doesn't. I just happen to have one, but it could be a regular 1W LED. I am indifferent.

Added after 17 [minutes]:

In addition to the topic:
- I have 30 posts with lights. In the evening, the twilight switch feeds power to them.
- they are illuminated at about 10%
- after approaching any of them, this one starts illuminating at 100%
- leaving the post causes a return to illumination at 10% after 30-40 seconds.
Such a soft start but from the 10% level.
Create an account, log in and become active in a forum and ads will not appear. You will receive points by participating in discussions.
Join this discussion.

Install the application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Wanted dimmer controller for COB 1W/12V with brightness control from 10% to 100%

Didn't find an answer? Ask Artificial Intelligence