![[ZIGBEE] 20A Zigbee socket with energy metering (Tuya TS011F_plug_3)](https://obrazki.elektroda.pl/1000454900_1749493372_thumb.jpg)
![[W600 / TW-03] Door Sensor - Bootloop on 1.18.110/109 Firmware](https://obrazki.elektroda.pl/5552096400_1749191730_thumb.jpg)
Tuya TYWD 4CH-RF relay.
Good morning, a few questions:
1. is it possible to connect NO outputs in parallel?
2. is it possible to create scenes separately for each output? E.g. 1 turns on 2, 3, 4 and these turn on the devices in their logical subnetwork? Whereas switching on 2 or 3 or 4 only switches on the scene for its own logical subnetwork?
Good morning, a few questions:
1. is it possible to connect NO outputs in parallel?
2. is it possible to create scenes separately for each output? E.g. 1 turns on 2, 3, 4 and these turn on the devices in their logical subnetwork? Whereas switching on 2 or 3 or 4 only switches on the scene for its own logical subnetwork?
