Best Practice for Labeling 6-36 VDC Power Supply Range on Automotive Instruments

150 1

Report a violation of the law

Reply | New topic

#1 21671760 21 Jun 2014 09:27

Jason Krause Jason Krause

Anonymous

Post #1
21671760 21 Jun 2014 09:27

Hello all,

We are in the final stages of product development for an instrument that we will sell to the automotive industry. The instrument is operational between 6-36 VDC.

Is it common practice to label instruments with some "slop" on the lower end or should the label read 6-36 VDC?

Thanks,
Jason
ADVERTISEMENT
#2 21671761 24 Jun 2014 01:09

Neil Mula Neil Mula

Anonymous

Post #2
21671761 24 Jun 2014 01:09

Hi Jason,

I'm not sure what do you mean with slop.

If you're talking about the operational voltage, that's common to instruments. We can consider the relative error as long as it will not affect the operation.

If you're talking about the slop on labels literally, it is just okay but it is not good. If you aim for more good feedback, then fix it.

Good Luck.

Best,

Neil
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Best Practice for Labeling 6-36 VDC Power Supply Range on Automotive Instruments

Didn't find an answer? Ask Artificial Intelligence