3k Signal Generator for Russian PCB BOM—What Component Should I Use?

hi , i have a very vague bom to go with a pcb im assembling ive figured out everything on this im pretty sure except the 3k signal generator which im assuming is for a clock signal but dont know what to use , and the appropriate switch the bom is for a russian site and translated so dosent do much looking up parts here .. heres the schematic .. and heres the bom

Bill Of Materials
=================
Ïðîåêò: C:UsersAcidRainDesktopDEVICEdeviceV2deviceV2.DSN
Äîê. ¹.:
Ðåäàêöèÿ:
Àâòîð:
Ñîçäàí: 09/01/10
Èçìåíåí: 20/04/10

QTY PART-REFS VALUE CODE
--- --------- ----- ----
Resistors
---------
1 R1 1k5 72-0809
1 R2 5M 72-0825

Capacitors
----------
1 C1 1n Farnell 317-457

Integrated Circuits
-------------------
1 U1 24LC512

Miscellaneous
-------------
1 GENERATOR 3k 72-0825

Hi,

What is the question here? Are you asking for help on the parts?

From the way I look at it, it would be quite difficult if you only have this information. Besides, I tried to follow your blogs in this site. It shows you have been posting the same parts for the generator. I have a doubt you haven't yet found your parts.

i am having trouble finding out what the person means in the schematic by "3k generator" i know its something to do with a clock but what to use specifically i dont know , and yes i found out all the parts but two since i last posted , a member was able to tell me how to find out what package layout my pcb needed and i was able to locate everything but this.