Using 12V 4A Laptop AC Adapter to Run Dayton 2M197 12V DC Motor Safely?

243 5

Report a violation of the law

Reply | New topic

#1 21677019 20 Feb 2017 15:35

Steven Manthey Steven Manthey

Anonymous

Post #1
21677019 20 Feb 2017 15:35

I have a Dayton Model No. 2M197, 12 Volt PM DC motor that is 1/35 HP, 2350 RPM. 3.7 full load amps. My question is, can I use an AC adapter from let's say a laptop computer. I found one that outputs 12 Volts and 4 Amps. I ran this motor off of my 12 Volt 4 Amp battery charger and it seems to run just fine. I would just like to find something to us that's a little less cumbersome. Any insight on this would be appreciated!
ADVERTISEMENT
#2 21677020 20 Feb 2017 21:21

Kevin Angelo Ma Kevin Angelo Ma

Anonymous

Post #2
21677020 20 Feb 2017 21:21

Can you discuss further what your question is?
ADVERTISEMENT
#3 21677021 21 Feb 2017 01:02

Steven Manthey Steven Manthey

Anonymous

Post #3
21677021 21 Feb 2017 01:02

My question is, can I use an AC adapter from let's say a laptop computer or something similar.
ADVERTISEMENT
#4 21677022 21 Feb 2017 09:48

Aripriharta Aripriharta Aripriharta Ariprih...

Anonymous

Post #4
21677022 21 Feb 2017 09:48

Yes. You can, The current rating and voltage ratings are acceptable. The ac adapter from laptop PS is AC-DC-DC converter. but It should be run in constant speed. So, if you need to control the speed you should create the control circuit.
ADVERTISEMENT
#5 21677023 21 Feb 2017 15:11

richard gabric richard gabric

Anonymous

Post #5
21677023 21 Feb 2017 15:11

Check the peak current when the motor starts, it is higher than the run current. If the power supply has over current shutdown, it may not start. A battery charger may not have that problem, it may just sag momentarily. So yes, but check that it starts a number of times if you can before you buy,
cheers,
Richard
#6 21677024 22 Feb 2017 20:46

Neil Mula Neil Mula

Anonymous

Post #6
21677024 22 Feb 2017 20:46

Hi Steven M.,

You can use that AC adapter on anything that can manage its capability to supply. However, using it with higher or lower rating that is over or under its capacity to withstand or handle may damage or will deliver improper operation.

In short, you can use it on those devices that have minor or little difference from its capability to supply, also you can still enjoy or have the desirable operation.

Hope it helps.

God Bless.

Best,
Neil
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Home page
/
Forum
/
Circuit Design
/
EEWeb Topics
/
Using 12V 4A Laptop AC Adapter to Run Dayton 2M197 12V DC Motor Safely?

Using 12V 4A Laptop AC Adapter to Run Dayton 2M197 12V DC Motor Safely?

Didn't find an answer? Ask Artificial Intelligence