UB3 Jiffy Plastic Box Sourcing in UK for EPE April 2018 DDS Signal Generator Project

Apologies if this the wrong forum/location, it's actually quite difficult to find area dealing with projects in EPE -Query is related to DDS Signal Generator in April 2018 issue of EPE - has anyone any pointers please of where to locate a "UB3 jiffy plastic box" in the UK? I can only find references to boxes in Australia that cost about £2/3 but have shipping costs of £20! Any help appreciated.
Regards,
T

Hi Turlough,
When posting into EEWeb about EPE projects, if you
remember to [also] 'tag' your post with EPE-Magazine [it will
auto-complete] , your message will be posted into the right area and
I'll be alerted automatically, with a better chance of a reply.
It's
true that one-off costs of cheap parts are not really viable given air
freight, duty and import etc. so it might be necessary to substitute.
You would have to sort the front panel DIY as well.  More guidance on
this project is available on the designer's web site (GeoffG.Net) but of course the laser-cut panel we talk about, is intended for the specified box.
Hope that helps,
Alan W

Thanks Alan. Issue of "tag" noted.  Appreciate project designed for the "UB3 box" - will keep searching! Regards

Hi,
Rapid electronics sell a box that should fit, G1022B matches the original dimensions:https://www.rapidonline.com/rapid-g1022b-abs-box-multipurpose-130-x-68-x-44-30-3362
I used another from this range for the Insulation tester (April 2016) and the pre-cut panel fit OK.Ian

Ian, excellent. Many thanks for pointer!
RegardsTurlough