High-Quality 3.5mm Stereo Jack Socket Alternatives for PCB Mount Audio Projects

I'm using Chinese 3.5mm Stereo Jack Socket Audio Jack Connector PCB mount in my project, please refer the image attached. It works fine, quality is reasonably okay for its price but I'm not very happy with its sturdiness. I tried searching it online but could not find one with better quality. Any leads/suggestions would be appreciated.

Hi Aryan- I'm glad you're using the 3.5mm and not the 2.5mm version.  Those are really fragile.The problem with sturdiness on the 3.5mm connectors is usually not at the jack end, but at the plug end. They often break where the cylindrical contact area meets the plug body. The jacks in the picture you attached really don't look bad to me.  At least they have metal around the entry opening. You didn't say how many circuits you need, whether or not you need a switch, or if it must be shielded.  Try This search and see if you find something you like.By the way, you probably already know this, but if you need to have the most rugged jack, stay away from surface mount. It doesn't take much to knock one of those off of a PCB (voice of experience speaking).-Rick

Aryan, Rick has said just about exactly what I would say - those are through-hole, they have a metal entry, and they're probably as good as anything you will find.The only thing I could add is that when you assemble them, make sure there is a good bit of solder on the PCB joints.  One of the main points of failure of connectors like this is not enough solder (usually caused by wave soldering machines) and with a bit of strain from pushing the plug in and out, one of more joints will fail.  If I had a dollar for every connector I've resoldered I would be a rich man.  so do pay attention to that.