Hello As in the subject, I have a question whether the PT-1000 resistance temperature sensor can work with two temperature reading devices 1 solar controller st402n 2 room panel i will immediately point out that the controller does not have a room panel provided so i would like to make it myself...

I would like to know how to extract data from this controller and make it visible via the Internet, because the cost of buying an Ethernet module st-500 is high (470 PLN) and I would like to do it myself with Arduino While the installation of additional sensors in the exchanger is not a problem, the installation of an additional sensor at the collector is already a big problem

Can the PT-1000 sensor handle an ST402n controller and panel on an Arduino?

poldeczek1 2028 2

Treść została przetłumaczona

Zobacz oryginalną wersję tematu

Report a violation of the law

Reply | New topic

#1 13783563 10 Jul 2014 11:47

poldeczek1 poldeczek1

Level 12

Posts: 280

Rate: 36
» | Topic author

Post #1
13783563 10 Jul 2014 11:47

Hello
As in the subject, I have a question whether the PT-1000 resistance temperature sensor can work with two temperature reading devices
1 solar controller st402n
2 room panel
i will immediately point out that the controller does not have a room panel provided so i would like to make it myself with the help of ARDUINO
ADVERTISEMENT
#2 13786864 11 Jul 2014 13:30

Anonymous Anonymous

Anonymous

» |

Post #2
13786864 11 Jul 2014 13:30

poldeczek1 wrote:
can the PT-1000 resistance temperature sensor work with two temperature reading devices

No
#3 13787073 11 Jul 2014 14:40

poldeczek1 poldeczek1

Level 12

Posts: 280

Rate: 36
» | Topic author Helpful post? (0)

Post #3
13787073 11 Jul 2014 14:40

I would like to know how to extract data from this controller and make it visible via the Internet, because the cost of buying an Ethernet module st-500 is high (470 PLN) and I would like to do it myself with Arduino

While the installation of additional sensors in the exchanger is not a problem, the installation of an additional sensor at the collector is already a big problem
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Home page
/
Forum
/
Smart Home
/
Smart Home IoT
/
Can the PT-1000 sensor handle an ST402n controller and panel on an Arduino?

Can the PT-1000 sensor handle an ST402n controller and panel on an Arduino?

Didn't find an answer? Ask Artificial Intelligence