I own motors for roller shutters made by Rademacher, Rohrmotor type 4130. I bought the motors used I do not have any programming instructions for them, i found a wiring diagram but do not know how to program them. The motor has a 5-core cable and a reset button on the housing. When I connect the...

If the topic is up to date then you have the manual...Unfortunately in German, but also pictorial.

rADEMACHER roller shutter motor - How to program the roller shutter motor

ciontyk 3630 1

Treść została przetłumaczona

Zobacz oryginalną wersję tematu

Report a violation of the law

Reply | New topic

#1 15001754 17 Sep 2015 20:31

ciontyk ciontyk

Level 11

Posts: 30

Rate: 10
» | Topic author

Post #1
15001754 17 Sep 2015 20:31

I own motors for roller shutters made by Rademacher, Rohrmotor type 4130.
I bought the motors used I do not have any programming instructions for them,
i found a wiring diagram but do not know how to program them.
The motor has a 5-core cable and a reset button on the housing. When I connect the cable and press the up button on the switch, the motor cycles. Please advise how to program these motors
eufyMake E1 - łatwa personalizacja za pomocą druku UV [sponsorowany]
ADVERTISEMENT
#2 15114771 01 Nov 2015 21:19

Marek J. Marek J.

VIP Meritorious for electroda.pl

Posts: 2368

Help: 526

Rate: 950
» | Helpful post? (+1)

Post #2
15114771 01 Nov 2015 21:19

If the topic is up to date then you have the manual...Unfortunately in German, but also pictorial.

Attachments:

Rademacher_RolloTube-Intelligent-RTIS-RTIM.pdf (1.48 MB) You must be logged in to download this attachment.

Montaż i serwis automatyki do bram wjazdowych i garażowych.
Automatyzacja rolet, zdalne sterowania piloty i odbiorniki.
Tel. 503930033
“ Nie dyskutuj z idiotą. Najpierw sprowadzi cię do swojego poziomu, a potem pokona doświadczeniem. ”
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Perplexity AI, Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Home page
/
Forum
/
Smart Home
/
Smart Home IoT
/
rADEMACHER roller shutter motor - How to program the roller shutter motor

rADEMACHER roller shutter motor - How to program the roller shutter motor

Didn't find an answer? Ask Artificial Intelligence