Hello
I have been looking for some time and cannot find bell switches for PLC based lighting.
Ideally they should be tactile and with a 24 VDC backlight
They will not operate under any load, they will just transmit a 24 VDC pulse to the PLC input. A 4x0.5mm2 cable will be run to each switch
I would be grateful for any suggestions.
Regards
I have been looking for some time and cannot find bell switches for PLC based lighting.
Ideally they should be tactile and with a 24 VDC backlight
They will not operate under any load, they will just transmit a 24 VDC pulse to the PLC input. A 4x0.5mm2 cable will be run to each switch
I would be grateful for any suggestions.
Regards