logo elektroda
logo elektroda
X
logo elektroda
Dostępna jest polska wersja

Czy wolisz polską wersję strony elektroda?

Nie, dziękuję Przekieruj mnie tam

GEZE WRM-230 loses remote control programming after power failure - how to fix?

adamjur1 801 0
ADVERTISEMENT
Treść została przetłumaczona polish » english Zobacz oryginalną wersję tematu
  • #1 17459038
    adamjur1
    Level 42  
    Posts: 7051
    Help: 771
    Rate: 1000
    Hello
    I have 6 of these receivers with individual remotes, they are about 7 years old, and have been controlling the opening and closing of the tilt windows in the office for 7 years. Their disadvantage is the loss of programming of the remotes, every now and then they stop seeing their remote. I am ruling out weak batteries in the remote control, this happens after a 230V power failure, but out of a group of 6, for example one loses contact and not always....
    Has anyone dealt with this control and knows the construction of the receiver - does it have e.g. a battery maintaining the memory (7 years ...) or possibly a capacitor (7 years may have lost its parameters)?
    The situation is problematic in that so far two drives have been taken apart unnecessarily by resourceful young angry people and I have had to reassemble them (a cuckoo clock is no big deal compared to this drive). Now they know that all they have to do is detach them from the window and tape them up, but that doesn't solve the problem in the long run....
    Greetings. J.
  • ADVERTISEMENT
ADVERTISEMENT