![[ZIGBEE] 20A Zigbee socket with energy metering (Tuya TS011F_plug_3)](https://obrazki.elektroda.pl/1000454900_1749493372_thumb.jpg)
![[W600 / TW-03] Door Sensor - Bootloop on 1.18.110/109 Firmware](https://obrazki.elektroda.pl/5552096400_1749191730_thumb.jpg)
Good morning everyone
I have this idea to equip the remote control with which the rehabilitation bed is controlled (up, down) with a snoff basic Wi-Fi switch.
This way, a disabled person who cannot touch the buttons will be able to voice-dial "up, down".
Is such a thing possible? The switch needs 230 V.
Do you have any ideas on how to bite the subject, or is it even worth moving? Or would someone commercially undertake this task?
I have this idea to equip the remote control with which the rehabilitation bed is controlled (up, down) with a snoff basic Wi-Fi switch.
This way, a disabled person who cannot touch the buttons will be able to voice-dial "up, down".
Is such a thing possible? The switch needs 230 V.
Do you have any ideas on how to bite the subject, or is it even worth moving? Or would someone commercially undertake this task?
