![[ZIGBEE] 20A Zigbee socket with energy metering (Tuya TS011F_plug_3)](https://obrazki.elektroda.pl/1000454900_1749493372_thumb.jpg)
![[W600 / TW-03] Door Sensor - Bootloop on 1.18.110/109 Firmware](https://obrazki.elektroda.pl/5552096400_1749191730_thumb.jpg)
Hello
I'm going to give a bit of background on this ZWT 198 controller
I would like to connect it to an Ecocondens thermet gold 20 gas cooker .
Preferably 2 pieces and combine them with Tuya Zigbee Avatto TRV 06 thermostatic heads to make 2 independent zones on the porter and on the 1st floor .
Is this doable ? ??
Possibly still connected to the furnace wirelessly ...probably via a voltage-free relay?
Is it better to choose a controller over zigbee or wifi ?
Someone can help .
Unless there are ready-made Avatto wireless controllers?
I'm going to give a bit of background on this ZWT 198 controller
I would like to connect it to an Ecocondens thermet gold 20 gas cooker .
Preferably 2 pieces and combine them with Tuya Zigbee Avatto TRV 06 thermostatic heads to make 2 independent zones on the porter and on the 1st floor .
Is this doable ? ??
Possibly still connected to the furnace wirelessly ...probably via a voltage-free relay?
Is it better to choose a controller over zigbee or wifi ?
Someone can help .
Unless there are ready-made Avatto wireless controllers?
Moderated By p.kaczmarek2:.Separated from
How to modify the hysteresis and temperature jump in the Avatto ZWT 198 thermostat .
