Meaning of 2M Charge Cable Spec: 30AWG, 22AWG, AL/MY, D.W, Braid, LED Explained

Hi, I am working with a Taiwan company to make a charge cable for tablets. I have been trying to get specs for the cable for a while but they are slow to respond but finally they sent me this equation but I don't understand it. Can someone tell me what each part means?
 
1.      Here is the specification for 2M cable with LED
30AWG(19/0.05TC+250D)*1P+22AWG(46/0.10TC+250D)*1C+AL/MY+D.W(16/0.10TC+250D)*3C+Braid
 
Thank you,
Mark S.

I think every cable outfit has its own lingo, but here's my guess, based on some experience with domestic and offshore cable makers. I presume you know that "AWG" is wire gauge.

It looks like the "+" separates items, and the "*" indicates quantity, like a multiply sign.

30AWG(19/0.05TC+250D)*1P = 1 pair ("1P") of 30AWG wires, each of 19 strands of .05 diam wire ("0.05TC"), with 250(mils?) insulation. Unknown dimensions.

22AWG(46/0.10TC+250D)*1C = 1 conductor ("1C") of 22AWG wire, made of 22 strands of 0.1 diam ("0.1TC"), again with 250 insulation.

AL/MY = aluminized mylar wrapping

D.W(16/0.10TC+250D)*3C = 3 conductors of some kind of wire with 16 strands, as above.

Hope this gives you some clues, and doesn't lead you astray.

Thank you! 1P( pair) + 1C + 3C = total of 6 wires?

That's what it looks like to me. Plus the outer braid (shield, probably) of course.

It really helps to have a telephone conversation to clarify things, and/or engineering drawings, if they're responsive.