Hello,
i have flashed this switch 4 times, but unfortunately the S1 switch contact does not work with the PIN assignment.
https://www.elektroda.com/rtvforum/topic4099102.html#21393164
AI: Which exact switch model and which firmware version is involved?
Girier Smat Switch 1 gear
AI: How exactly is the S1 switch contact connected and what exactly happens when you actuate it (e.g. no reaction, malfunction, error message)?
No reaction on pin 26
i have flashed this switch 4 times, but unfortunately the S1 switch contact does not work with the PIN assignment.
https://www.elektroda.com/rtvforum/topic4099102.html#21393164
{
"rl1_lv":"1",
"on_off_cnt":"10",
"onoff_rst_m":"1",
"onoff_clear_t":"10",
"rand_dpid":"42",
"net_trig":"4",
"onoff_n":"5",
"netled1_lv":"1",
"jv":"102",
"onoff_rst_type":"2",
"total_bt_pin":"24",
"nety_led":"0",
"over_cur":"20000",
"total_stat":"2",
"reset_t":"3",
"netled1_pin":"9",
"chip_type":"3",
"lose_vol":"40",
"remote_add_dp":"49",
"remote_list_dp":"50",
"net_type":"0",
"over_vol":"300",
"inch_dp":"44",
"module":"CBU",
"ch_cddpid1":"9",
"onoff1":"26",
"clean_t":"6",
"init_conf":"38",
"zero_select":"0",
"onoff_type":"0",
"series_ctrl":"2",
"total_bt_lv":"0",
"cyc_dpid":"43",
"remote_select":"0",
"ch_num":"1",
"rl1_pin":"20",
"ele_rx":"10",
"netn_led":"0",
"vol_def":"0",
"ch_dpid1":"1",
"ele_tx":"11",
"crc":"118"
}
AI: Which exact switch model and which firmware version is involved?
Girier Smat Switch 1 gear
AI: How exactly is the S1 switch contact connected and what exactly happens when you actuate it (e.g. no reaction, malfunction, error message)?
No reaction on pin 26
