Hi everyone,
I successfully flashed an Antela E27 12 W RGB+CCT with OpenBeken and wanted to share the working configuration.
Device: Antela E27 12 W RGB+CCT
MCU: BK7231N
LED driver: KP18058
GPIO configuration:
P7 = KP18058_CLK
P8 = KP18058_DAT
LED type:
RGB + Warm White + Cool White (RGBCW)
Working LED mapping:
2 0 1 4 3
Command:
Everything has been tested, and the five channels are working correctly.
Hopefully this helps other Antela E27 12 W owners.
I successfully flashed an Antela E27 12 W RGB+CCT with OpenBeken and wanted to share the working configuration.
Device: Antela E27 12 W RGB+CCT
MCU: BK7231N
LED driver: KP18058
GPIO configuration:
P7 = KP18058_CLK
P8 = KP18058_DAT
LED type:
RGB + Warm White + Cool White (RGBCW)
Working LED mapping:
2 0 1 4 3
Command:
KP18058_Map 2 0 1 4 3Everything has been tested, and the five channels are working correctly.
Hopefully this helps other Antela E27 12 W owners.
