Hello, I have a SOCOMEC COUNTIS E24 energy sub-meter from which I want to read the value after modbus, I have the kit as from the link and programmed esp 8266 d1 mini
https://github.com/krzysiek2788/ESPHome-SDM63...uEl6cq924oysGl2qqBywAb7y4lLpWjGh71mCe7z_AwMNM
I have changed the hex addresses in the settings of the sdm 630 meter, I thought the communication would work, but the esp only resets, the meter is supposed to send data to the home assistant, below are the instructions of the meter and the list of hex addresses
https://www.socomec.com/files/live/sites/syst...N-AND-OPERATING-MANUAL_2020-07_545877A_PL.pdf
https://www.socomec.com/files/live/sites/syst...e/countis/countis_e/Countis_E24_48503051.html
https://github.com/krzysiek2788/ESPHome-SDM63...uEl6cq924oysGl2qqBywAb7y4lLpWjGh71mCe7z_AwMNM
I have changed the hex addresses in the settings of the sdm 630 meter, I thought the communication would work, but the esp only resets, the meter is supposed to send data to the home assistant, below are the instructions of the meter and the list of hex addresses
https://www.socomec.com/files/live/sites/syst...N-AND-OPERATING-MANUAL_2020-07_545877A_PL.pdf
https://www.socomec.com/files/live/sites/syst...e/countis/countis_e/Countis_E24_48503051.html
