![[ZIGBEE] 20A Zigbee socket with energy metering (Tuya TS011F_plug_3)](https://obrazki.elektroda.pl/1000454900_1749493372_thumb.jpg)
![[W600 / TW-03] Door Sensor - Bootloop on 1.18.110/109 Firmware](https://obrazki.elektroda.pl/5552096400_1749191730_thumb.jpg)
Does anyone have any idea how to implement remote control of the Hager EV102 dimmer via a Smart Home system?
I would like to place it in the distribution board, where there are LED panels to be controlled (quite a lot of them, hence this version of the dimmer). Unfortunately, I do not have any cable from the switchboard to the place from which the control is to take place, hence the only thing in question is some kind of controller, which can be controlled through some kind of Smart Home system. I have several at home connected via Homebridge, so at least an idea of how to approach the subject.
I would like to place it in the distribution board, where there are LED panels to be controlled (quite a lot of them, hence this version of the dimmer). Unfortunately, I do not have any cable from the switchboard to the place from which the control is to take place, hence the only thing in question is some kind of controller, which can be controlled through some kind of Smart Home system. I have several at home connected via Homebridge, so at least an idea of how to approach the subject.
