Some time ago I bought by mistake some modules marked XH-WB2S_V2.0 I was told on this forum they contain a BK7238. Now I see there are load modules available for it OpenBK7238_QIO_1.18.111.bin What tool shall I use to program a BK7238 via UART?

backup and flash is possible with Easy Flasher in BK7238 mode

Home page
/
Forum
/
Smart Home
/
Smart Home IoT
/
BK7238 UART Flashing Tool for XH-WB2S_V2.0 Module and OpenBK7238 Firmware

BK7238 UART Flashing Tool for XH-WB2S_V2.0 Module and OpenBK7238 Firmware

taggbricka 15 1

Reply | New topic

#1 21582150 17 Jun 2025 19:54

taggbricka taggbricka

Level 7

Post #1
21582150 17 Jun 2025 19:54

Some time ago I bought by mistake some modules marked XH-WB2S_V2.0
I was told on this forum they contain a BK7238.
Now I see there are load modules available for it "OpenBK7238_QIO_1.18.111.bin"

What tool shall I use to program a BK7238 via UART?
ADVERTISEMENT
#2 21582241 17 Jun 2025 21:15

divadiow divadiow

Level 34

Helpful post? (0)

Post #2
21582241 17 Jun 2025 21:15

backup and flash is possible with Easy Flasher in BK7238 mode https://github.com/openshwprojects/BK7231GUIFlashTool
Create an account, log in and become active in a forum and ads will not appear. You will receive points by participating in discussions.
Join this discussion.

Install the application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Home page
/
Forum
/
Smart Home
/
Smart Home IoT
/
BK7238 UART Flashing Tool for XH-WB2S_V2.0 Module and OpenBK7238 Firmware

Read more new topics

Carro Beer Bottle Pendant Light Teardown: OpenBK7231N OTA Flash, Pin Mapping
17 Jun 2025 20:23 (0)
Today, we are going to decloud a nice pendant light in the shape of beer bottles Link . According to the manual, it is made by Carro. Obviously, I didn't want to install their stinky app, so here we go. Inside the lamp, we see a 24V PS and an LED controller. The LED driver is powered by a CB3S IC, therefore, you'd need the BK7231N FW (I know it says it is for WB3S, but nonetheless) . Since we will...[Read more]
How to Rename openBK Switch Entity and Separate External Switch in HASS with BK7231N?
17 Jun 2025 12:21 (3)
I flashed without problems a device like this one I want to use the device with HASS in the most flexible way, I set with default parameters and they works without problems but i'm unable to understand if some features can be used with openBK or if the firmware doesn't support it "pins": { "6": "TglChanOnTgl;1", "7": "Rel;1", "23": "Btn_Tgl_All;0", "26": "WifiLED_n;0" }, "command": "PowerSave 1", Since...[Read more]
Home Assistant (Re)Discovery Issue After Changing the Device Name
16 Jun 2025 15:30 (2)
Sorry for a noob question... It is my first attempt with OB... I have flashed a Tongou DIN Smart meter and breaker (BK7231N) device with OpenBeken FW. It runs, got MQTT connection and made it discoverable in Home assistant. I then realized that the device name and MQTT topic was not properly set. I have changed them (device name, MQTT topic...) on the client side. The changes did not reflect on HA...[Read more]
[BK7231N] [CBU] Tuya WX400P RGBW Music Ir LED Strip с кнопками
14 Jun 2025 20:57 (3)
I am writing through an online translator, please do not pay too much attention to the text... New leading radio communication RGBW WX400P with leading: Built-in microphone communication, Using WiFi connection, Synchronization of LEDs with music, IR remote control, with leading microphone communication, Using WiFi connection, Synchronization of LEDs with music, IR remote control, with leading radio...[Read more]
OpenBK7231N CB2S Relay: Custom Button Logic for Pool Lamp Color Change
14 Jun 2025 17:46 (4)
Hello and thank you for this great board! I bought a wireless (WiFi + 433 MHz RF) 2-channel relay with a CB2S module and flashed it with OpenBK7231N. Everything works fine, and the extracted pinout matches my measurements: Button (Channel 1) on P6 WiFi LED on P26 Relay (Channel 2) on P24 Button (Channel 2) on P8 Relay (Channel 1) on P7 But where are the default assignments defined? I’d like to modify...[Read more]

BK7238 UART Flashing Tool for XH-WB2S_V2.0 Module and OpenBK7238 Firmware

Didn't find an answer? Ask Artificial Intelligence