Ledvance Smart+ Indoor Flex RGB + Tunable White BK7231T, parameter 24?

After several hours of testing, I’ve come up with a more or less functional version of the LED strip.
What’s currently available:
Color brightness adjustment
Color selection
Adjustment of “white” brightness by changing the color temperature.

I tried using parameter 24, but in that case, the strip behaves unpredictably.


Attached is the config:


I apologize in advance if the formatting does not conform to the forum guidelines.

Translated with DeepL.com (free version)

Hey, can you define what kind of faulty behaviour do you experience? How it behaves, and how do you expect it to behave?

senyanekit wrote:

I tried using parameter 24, but in that case, the strip behaves unpredictably.

>>21909301 Good afternoon!
If parameter 24 is enabled, the following issues occur:
Color temperature adjustment—with parameter 24 disabled, it functions as a brightness control for the highlighted white LED (which is actually quite yellow); when parameter 24 is enabled, it functions as a brightness control for the white light (this time from the RGB LED);

Selecting a color from the palette activates the highlighted white LED, and the approximate color selected in the palette turns on very dimly on the RGB LED. However, if you set the white slider in the color temperature control to maximum, the color change begins to work (it likely functions as an RGB LED brightness control);

LED Dimmer/Brightness functions solely as a brightness control for the RGB LED; the highlighted white LED does not change brightness and remains lit.