![[ZIGBEE] 20A Zigbee socket with energy metering (Tuya TS011F_plug_3)](https://obrazki.elektroda.pl/1000454900_1749493372_thumb.jpg)
![[W600 / TW-03] Door Sensor - Bootloop on 1.18.110/109 Firmware](https://obrazki.elektroda.pl/5552096400_1749191730_thumb.jpg)
Hello
I have a socket configured with a crypto digger. Set up so that when the current drops to a given value, it resets and restarts and sends a notification. Up until now everything has worked without any problems, however for some time now it has not been working.
Despite the drop in current, the socket runs unchanged and does not send a notification.
The app tuya, I removed and added the socket again, but it still does not work. Previously zero problems.
Has anyone had similar problems?
I have a socket configured with a crypto digger. Set up so that when the current drops to a given value, it resets and restarts and sends a notification. Up until now everything has worked without any problems, however for some time now it has not been working.
Despite the drop in current, the socket runs unchanged and does not send a notification.
The app tuya, I removed and added the socket again, but it still does not work. Previously zero problems.
Has anyone had similar problems?
