![[ZIGBEE] 20A Zigbee socket with energy metering (Tuya TS011F_plug_3)](https://obrazki.elektroda.pl/1000454900_1749493372_thumb.jpg)
![[W600 / TW-03] Door Sensor - Bootloop on 1.18.110/109 Firmware](https://obrazki.elektroda.pl/5552096400_1749191730_thumb.jpg)
Hello, I would like to use PWM in a Taspot on an ESP8266 D1 MINI to brighten and dim a 12V LED lamp in such a way that at 20:00 the lamp starts brightening and lasts for 2 hours to maximum. It then shines at maximum power for a couple of hours and then starts dimming the lamp, which also lasts for 2 hours until it goes out completely. Please give me some suggestions on how I can do this. I am assuming that some rules will have to be written. Please give some suggestions on how to get started. These times I have given are a theoretical assumption for now. I will rather have to refine it to my own needs.
Hello, I would like to use PWM in a Taspot on an ESP8266 D1 MINI to brighten and dim a 12V LED lamp in such a way that at 20:00 the lamp starts brightening and lasts for 2 hours to maximum. It then shines at maximum power for a couple of hours and then starts dimming the lamp, which also lasts for 2 hours until it goes out completely. Please give me some suggestions on how I can do this. I am assuming that some rules will have to be written. Please give some suggestions on how to get started. These times I have given are a theoretical assumption for now. I will rather have to refine it to my own needs.
