[BK7231N / CB2S BL0937] Woox R6113 Smart Plug
Device information
Woox - R6113-4PACK
4 pieces Smart Plug EU, Schucko with energy monitoring
Model: R6113
EAN: 8435606721219
(Bought at Amazon)
Similar to (BK7231N/CB2S - BL0937) WOOX R6128 Smart Plug with Energy Monitoring
Carefully open case (there are clip on the 4 edges). But it's quite easy to open. (see also [BK7231N/CB2S] Teardown CALEX Smart Powerplug EU plus 16A)
For flashing I connected my FT232RL USB to TTL serial adapter as follows with the CB2S BL0937 chip:
The red cable is for reset (=start flashing).
I flashed all 4 devices with the BK7231Flasher.
My config looks like this:
And as I'm mainly using MQTT:
Start-up command:
Web-App config:
You can easily do updates later with the OTA feature in the web app:
See also the related repository to find the releases.
Woox - R6113-4PACK
4 pieces Smart Plug EU, Schucko with energy monitoring
Model: R6113
EAN: 8435606721219
(Bought at Amazon)
Similar to (BK7231N/CB2S - BL0937) WOOX R6128 Smart Plug with Energy Monitoring
Carefully open case (there are clip on the 4 edges). But it's quite easy to open. (see also [BK7231N/CB2S] Teardown CALEX Smart Powerplug EU plus 16A)
For flashing I connected my FT232RL USB to TTL serial adapter as follows with the CB2S BL0937 chip:
The red cable is for reset (=start flashing).
I flashed all 4 devices with the BK7231Flasher.
My config looks like this:
And as I'm mainly using MQTT:
Start-up command:
Web-App config:
You can easily do updates later with the OTA feature in the web app:
See also the related repository to find the releases.
clemensfabig76 wrote 3 posts with
rating 2 .
Been with us since 2023 year.
Comments
Thanks! Please also paste config json from "Launch Web Application" so I don't have to manually type everything into the database. [Read more]
you mean this: { "vendor": "Woox", "bDetailed": "0", "name": "WOOX R6113", "model": "R6113", "chip": "BK7231N", "board": "CB2S BL0937", "flags": "36246663", "keywords": [ ... [Read more]
Yes, thank you. This is the correct template export in JSON format. [Read more]
I only realized it now, but why do you have LED commands for a relay switch (on/off) plug? [Read more]
Oh I have not even realized! I guess it was still from "playing around"! [Read more]
I have the same plugs, but I am not able to backup the orginal OEM-Firmware. I just succeded with flash without backup. Can you explain how you did the backup to be able to revert again? Here is my... [Read more]
It always works for me, but we indeed had some similiar issues reported on forum. First I would suggest you to try multiple baud rates (preferrably lower ones), next try to shorten your flashing wires,... [Read more]
Hey, thanks for your support. - I bought especially this good part to never have the "try another adapter" problem. I can report with windows 10 it works like a charm with the same adapter. - So either... [Read more]
There were indeed reports saying that Mono is problematic. I am unable to determine what may go wrong there at the moment. Do you have any ideas how to approach it? It might be easier to fix hid_download_py.... [Read more]