logo elektroda
logo elektroda
X
logo elektroda
Advanced Search
logo elektroda

Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828

divadiow 1632 8
ADVERTISEMENT
Report a violation of the law
Reply | New topic
  • #1 21549325
    divadiow
    Level 36  
    I have a small collection of X6, A9 and X5 mini spy cams with main chips from Taixin, Beken and XRadioTech. One commonality is the 18-pin FFC (flexible flat cable) ZIF (zero insertion force) connector that the cam modules are connected to the main PCB with.
    A mini spy camera circuit board with a microphone, lens, and 18-pin FFC ZIF connector on a blue background.

    From looking at strings in the firmware dump of an XRadio XF16 chip it seems the XF16 might support this list of cams:

    Code: Text
    Log in, to see the code

    The XF16's uart log out is helpful enough to print which one it detects is connected. This presents a good opportunity to identify each cam, assuming the pins are the same. Often identifying text printed on the ribbon doesn't make it immediately obvious what make/model the cam is. Here'll I'll present pics and the relevant XF16 boot log to show initialisation. Maybe this will help others to identify their cameras. It is also a record for me of what I have.

    GalaxyCore GC0329 DC-H8-G2 DC-H8-C2 9-1303V2
    Mini camera module with wide-angle lens and FFC cable on a blue background. Mini camera module with 18-pin FFC ZIF connector, viewed from connector side, on a blue surface.
    Init
    Code: Text
    Log in, to see the code

    GalaxyCore GC0329 X5-G29-2364V1
    Camera module with X5-G29-2364V1 printed on a black FFC cable lying on a blue surface. Mini camera module with connected 18-pin FFC cable on a blue surface.
    Init
    Code: Text
    Log in, to see the code


    GalaxyCore GC0310 LY023-A9-0310-V1 LT023-A9-0310-V1
    Mini camera module with fisheye lens and FFC ribbon cable on a blue background. Camera module with a flexible flat FFC cable and 18-pin connector on a blue background.
    Init
    Code: Text
    Log in, to see the code


    Hynix HI704 DC-H8-704-6182V1 DC-H0-7040-6182V1
    A small camera module with a wide-angle black lens on a flat cable labeled DC-H8-7 04-1182V1, placed on a blue background. Close-up of a camera module labeled DC-H8-7 04-1182V1 on a blue background. Camera module with metal shield and 18-pin FFC/ZIF connector, front view on blue background.
    Code: Text
    Log in, to see the code


    SuperPix SP0A19 LT1757-OA-10 V1.0 LT1757-QA-19 V1.0
    Mini camera module with a large lens and FFC ribbon labeled LT1757-OA 1.0 on a blue background. Spy camera module with flexible flat cable and 18-pin FFC connector on a blue background.
    Init
    Code: Text
    Log in, to see the code


    SuperPix SP0828 LT1888-0828(?) V1.0 L11888-0828(?)
    Miniature camera module on a blue background, with a large lens and 0828 V1.0 marking on the board. Mini camera module with metal cover and 18-pin FFC connector on a blue background.
    Init
    Code: Text
    Log in, to see the code

    SuperPix SP0828 HT12577-A9-B H12577-A9-8
    Miniature camera module with FFC ribbon cable on blue background, marked H12577 A9 B on the cable. Mini camera module with 18-pin FFC ZIF connector on a blue background, viewed from the shielding side.
    Init
    Code: Text
    Log in, to see the code
  • ADVERTISEMENT
  • #2 21550528
    divadiow
    Level 36  
    And from a Tuya mini doorbell (not this one but very similar). Contacts are on the opposite side of ribbon for this one as the cam points back through a hole in the PCB.

    GalaxyCore GC0309 SI2309 ST2309 -M7-39-V1
    Camera module with lens and electronic connector on a blue background. Metal electronic component with M7-39-V1 marking on a blue background.
    Init
    Code: Text
    Log in, to see the code
  • ADVERTISEMENT
  • #3 21583310
    divadiow
    Level 36  
    from a new BK7252UQN48 device

    GalaxyCore GC0312 STD-8136V0 STD-8136VO
    Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828 Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828
    Init
    Code: Text
    Log in, to see the code
  • ADVERTISEMENT
  • #5 21710596
    divadiow
    Level 36  
    SuperPix SP0828 S282-2156V1
    Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828 Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828
    Init
    Code: Text
    Log in, to see the code


    Added after 30 [minutes]:

    GalaxyCore GC0311 X5-G11-2365V1
    Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828 Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828
    Init
    Code: Text
    Log in, to see the code


    Added after 17 [minutes]:

    GalaxyCore GC0329 XLT-X5-0329-V1.0
    Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828 Identifying Mini Cam Modules: Hynix HI704 - GalaxyCore GC0329,GC0309,GC0310 - SuperPix SP0A19,SP0828
    Init
    Code: Text
    Log in, to see the code
  • ADVERTISEMENT
  • #6 21712521
    divadiow
    Level 36  
    Hynix HI704 LT1888-704 V1.0 LT1889(?)
    Camera module with LT1868-T04 V1.0 cable on blue background FPC ribbon cable with gold-plated connector and metal end on a blue surface
    Init
    Code: Text
    Log in, to see the code
  • #7 21713076
    divadiow
    Level 36  
    GalaxyCore GC0312 X5-G12-236V1
    Black camera with X5-G12-2363V1 marking on a blue background Flexible flat cable (FFC) with gold-plated contacts and mounting clip on a blue surface
    Init
    Code: Text
    Log in, to see the code
  • #8 21714889
    divadiow
    Level 36  
    SuperPix SP0A20 A9-P20-2295V1
    Camera module labeled A9-P20-2295V1 on a blue surface Electronic module with metal shield and contact connector on blue background
    Init
    Code: Text
    Log in, to see the code
  • #9 21721711
    divadiow
    Level 36  
    GalaxyCore GC0328C M9-G28-2527V1
    Camera module with ribbon cable and marking M9-G2B-2527V1 Black camera module with ribbon cable on a blue background
    Init
    Code: Text
    Log in, to see the code
Reply | New topic
Report a violation of the law

Topic summary

The discussion focuses on identifying mini camera modules compatible with the XRadio XF16 chip, commonly used in small spy cams such as X6, A9, and X5 models featuring Taixin, Beken, and XRadioTech main chips. These cameras typically use an 18-pin FFC ZIF connector to interface with the main PCB. Firmware dumps from the XF16 chip reveal support for a variety of camera modules including models from GalaxyCore, Hynix, and SuperPix. The XF16 UART boot log aids in detecting connected camera modules by name, facilitating identification despite unclear markings on the ribbon cables. Examples include GalaxyCore GC0309 and GC0312 modules, with initialization logs confirming successful detection and chip ID reads. The discussion also notes variations in connector orientation, such as in Tuya mini doorbell cameras, and provides photographic references for module identification.
Summary generated by the language model.
Popular Topics
ADVERTISEMENT