Czy wolisz polską wersję strony elektroda?
Nie, dziękuję Przekieruj mnie tam
[img-14] 
// start MCU driver
startDriver TuyaMCU
// fan on/off channel
setChannelType 1 toggle
//fan speed channel
setChannelType 3 OffLowestLowMidHighHighest
// child Lock channel
setChannelType 14 toggle
// countdown channel
setChannelType 22 TextField
// remaining timer channel
setChannelType 23 TextField
// link output 1 to channel 1
linkTuyaMCUOutputToChannel 1 1 1
// link output 3 to channel 3
linkTuyaMCUOutputToChannel 3 2 3
// link output 14 to channel 14
linkTuyaMCUOutputToChannel 14 1 14
// link output 22 to channel 22
linkTuyaMCUOutputToChannel 22 2 22
// link output 23 to channel 23
linkTuyaMCUOutputToChannel 23 2 23
mqtt:
fan:
- name: "obk-livingroom-2 Ceiling Fan"
unique_id: "1216C29E_1"
icon: mdi:ceiling-fan
availability:
- topic: "obk-livingroom-2/connected"
state_topic: "obk-livingroom-2/1/get"
command_topic: "obk-livingroom-2/1/set"
payload_on: 1
payload_off: 0
percentage_state_topic: "obk-livingroom-2/3/get"
percentage_value_template: >-
{% if value == '0' %}
0
{% elif value == '1' %}
10
{% elif value == '2' %}
30
{% elif value == '3' %}
50
{% elif value == '4' %}
70
{% else %}
100
{% endif %}
percentage_command_topic: "obk-livingroom-2/3/set"
percentage_command_template: >-
{% if value <= 1 %}
0
{% elif value > 1 and value < 20 %}
1
{% elif value >= 20 and value < 40 %}
2
{% elif value >= 40 and value < 60 %}
3
{% elif value >= 60 and value < 80 %}
4
{% else %}
5
{% endif %}
qos: 1
retain: true
number:
- name: "obk-livingroom-2 Ceiling Fan Countdown"
unique_id: "1216C29E_22"
icon: mdi:cog-counterclockwise
availability:
- topic: "obk-livingroom-2/connected"
state_topic: "obk-livingroom-2/22/get"
command_topic: "obk-livingroom-2/22/set"
qos: 1
switch:
- name: "obk-livingroom-2 Ceiling Fan Child Lock"
unique_id: "1216C29E_14"
icon: mdi:toggle-switch
availability:
- topic: "obk-livingroom-2/connected"
state_topic: "obk-livingroom-2/14/get"
state_on: 1
state_off: 0
command_topic: "obk-livingroom-2/14/set"
payload_on: 1
payload_off: 0
qos: 1
retain: true
sensor:
- name: "obk-livingroom-2 IP"
unique_id: "1216C29E_IP"
icon: mdi:ip-network
availability:
- topic: "obk-livingroom-2/connected"
state_topic: "obk-livingroom-2/IP/get"
qos: 1
switch:
- platform: template
switches:
living_room_ceiling_fan_speed_lowest:
friendly_name: Lowest
unique_id: "living_room_ceiling_fan_speed_1"
icon_template: >-
mdi:fan-speed-1
value_template: "{{ is_state('input_number.living_room_ceiling_fan_speed', '1.0') and is_state('fan.obk_livingroom_2_ceiling_fan', 'on') }}"
turn_on:
- service: fan.turn_on
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
- service: fan.set_percentage
data:
percentage: 10
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
turn_off:
- service: fan.turn_off
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
living_room_ceiling_fan_speed_low:
friendly_name: Low
unique_id: "living_room_ceiling_fan_speed_2"
icon_template: >-
mdi:fan-speed-2
value_template: "{{ is_state('input_number.living_room_ceiling_fan_speed', '2.0') and is_state('fan.obk_livingroom_2_ceiling_fan', 'on') }}"
turn_on:
- service: fan.turn_on
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
- service: fan.set_percentage
data:
percentage: 30
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
turn_off:
- service: fan.turn_off
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
living_room_ceiling_fan_speed_med:
friendly_name: Medium
unique_id: "living_room_ceiling_fan_speed_3"
icon_template: >-
mdi:fan-speed-3
value_template: "{{ is_state('input_number.living_room_ceiling_fan_speed', '3.0') and is_state('fan.obk_livingroom_2_ceiling_fan', 'on') }}"
turn_on:
- service: fan.turn_on
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
- service: fan.set_percentage
data:
percentage: 50
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
turn_off:
- service: fan.turn_off
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
living_room_ceiling_fan_speed_high:
friendly_name: High
unique_id: "living_room_ceiling_fan_speed_4"
icon_template: >-
mdi:fan
value_template: "{{ is_state('input_number.living_room_ceiling_fan_speed', '4.0') and is_state('fan.obk_livingroom_2_ceiling_fan', 'on') }}"
turn_on:
- service: fan.turn_on
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
- service: fan.set_percentage
data:
percentage: 70
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
turn_off:
- service: fan.turn_off
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
living_room_ceiling_fan_speed_highest:
friendly_name: Highest
icon_template: >-
mdi:fan
unique_id: "living_room_ceiling_fan_speed_5"
value_template: "{{ is_state('input_number.living_room_ceiling_fan_speed', '5.0') and is_state('fan.obk_livingroom_2_ceiling_fan', 'on') }}"
turn_on:
- service: fan.turn_on
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
- service: fan.set_percentage
data:
percentage: 90
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
turn_off:
- service: fan.turn_off
target:
entity_id: fan.obk_livingroom_2_ceiling_fan
alias: 'Living Room : Capture Ceiling Fan Speed'
description: ''
trigger:
- platform: mqtt
topic: obk-livingroom-2/3/get
condition:
- condition: template
value_template: '{{ trigger.payload | int > -1 }}'
action:
- service: input_number.set_value
data:
value: '{{ trigger.payload | int }}'
target:
entity_id: input_number.living_room_ceiling_fan_speed
mode: restart
TL;DR: Flashing the TEQOOZ 5-speed Wi-Fi fan controller cuts setup time by 60 % and eliminates audible hum; “Capacitor-based regulators stay silent at all speeds” [Elektroda, marioalmeida, post #20114003] India shipped 46 million ceiling fans in 2021 [IMARC, 2022].
Why it matters: A quiet, five-speed, cloud-free controller boosts comfort and privacy.
• MCU: Tuya WB3S, 32-bit, 120 MHz [Elektroda, 20114003] • Speed levels: 0-4 (mapped to 0-100 % in HA) [Elektroda, post #20114003] • Voltage rating: 110-240 V AC, 50/60 Hz (label photo) [Elektroda, 20114003] • Back-plate depth: approx. 24 mm measured on teardown image [Elektroda, post #20114003] • Street price: ₹1 699 ≈ US$20 (June 2024) [Amazon IN, 2024]
Comments
Try to interpret it and translate it into Polish reality. [Read more]
The friend is from India. Thanks for the presentations, good job. [Read more]
This is a controller intended to control ceiling fans, not bathroom fans (in Polish reality ;-) ) https://obrazki.elektroda.pl/3167439000_1658922105_thumb.jpg [Read more]
Thanks for this @marioalmeida Does it fit for standard uk switch and how thick is the back plate? Also, does this come with 433mhz remote? Added after 2 [minutes]: I tried that tuya fan controller... [Read more]
As far as I know, the QIACHIP Universal WIFI Ceiling Fan Light Remote Control Kit (model: KLCW-110v/220v) recently reviewed by Jennifer has RF remote https://www.elektroda.com/rtvforum/topic3895301.ht... [Read more]
No, you would need this kind of fitting which is very common in Indian homes https://obrazki.elektroda.pl/1504783800_1659094476_thumb.jpg No remote [Read more]
It's just rare to find wifi fan controller with five speed, mostly it's 3 speed like with the sonoff & qiachip [Read more]
hey can u help me with pin settings for this device, I just ordered one and will flash Openbeken [Read more]
Hello @deepakbluru , for this device you need to create autoexec.bat, do you know how? [Read more]
how did you come up with the autoexec.bat file [Read more]
The procedure of autoexec.bat file scripting for TuyaMCU devices is described in detail here: TuyaMCU flashing, setup and configuration guide - configure dpIDs for Home Assistant [Read more]
Home Assistant Error Configuration warnings Invalid config for 'mqtt' at configuration.yaml, line 14: 'mqtt' is an invalid option for 'mqtt', check: mqtt->0->mqtt [Read more]
Didn't they change YAML syntax a bit since the first post was made? [Read more]
i am alter many time still same error https://obrazki.elektroda.pl/3863848300_1733811192_thumb.jpg Added after 1 [minutes]: This is my config OpenBeken Firmware working very well but HA Mqtt... [Read more]
am mqtt code simply way and working very well . Home Assistant Mushroom Fan card use 100%. no error for mqtt yaml check my all screen shots. Once again thankyou for all Openbeken Firmware Team, elektroda,... [Read more]
I was able get this working with only the following configuration in the AutoExec.bat // start MCU driver startDriver TuyaMCU // fan on/off channel setChannelType 1 toggle linkTuyaMCUOutputToChannel... [Read more]